EBMX Motors
Toont alle 11 resultatenGesorteerd op nieuwste
-
EBMX Motors
EBMX XUB-80 SurRon Ultra Bee Motor – Gold
EBMX XUB-80 SurRon Ultra Bee Motor
EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Motor.
The XUB-80 Motor has been purpose built with dirt bike riders in mind.
Slightly bigger with an 80mm Stator thickness and more powerful than its little brother the XLB-60.
40KW rated & designed from the ground up to handle the heat, 180C rated windings with U42H magnets.
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 12000RPM.
Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built these motors to stay cool under race conditions to ensure you focus on your riding and not your motor temperatures. It doesn’t matter if you are on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 13000RPM. Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built this motor to perform back to back, if your on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.
Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result, they offer a more responsive motor experience and enhance performance reliability and durability. Furthermore, they contribute to improved low-end torque control and overall motor response.
Note
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning. If people want to buy an EBMX motor and combine it with another controller, they have to try to make it work properly themselves.
Our new motors have been engineered for performance enthusiasts and experienced riders in controlled environments. These motors are significantly faster than standard motors, and their extreme speed can pose serious risks if not handled with caution.
IMPORTANT SAFETY CONSIDERATIONS:
- NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. These motors are strictly meant for off-road use and controlled environments only.
- EXPERIENCED RIDERS ONLY: These high-performance motors are recommended for experienced riders who possess the necessary skills and expertise to handle powerful machines. Novice riders are strongly advised against using our motors.
- USE WITH CAUTION: The enhanced speed and power of our motors require extreme care and attentiveness. Always exercise caution and be aware of your surroundings when operating our products.
- UPGRADE SAFETY EQUIPMENT: It is crucial to ensure that your bike is equipped with upgraded brakes and other safety features capable of handling the increased speed and power provided by our motors. Using the motor with stock brakes or inadequate safety measures may result in accidents and severe injuries.
- ADHERE TO LOCAL LAWS: Familiarize yourself with local regulations and laws pertaining to off-road vehicle usage in your area. Always ride within designated areas and private tracks that allow for safe operation.
- KEEP AWAY FROM CHILDREN: Our motors are not toys, and they must be kept out of reach of children. Never allow minors or inexperienced individuals to operate these motors.
- RIDE RESPONSIBLY: Ensure that you are in a sound state of mind and not under the influence of any substances that could impair your judgment before operating the motor.
By purchasing and using EBMX Motors products, you acknowledge and understand the inherent risks associated with high-speed off-road motor use. EBMX or E-BIKES BORNEM shall not be liable for any injuries, accidents, damages, or losses incurred as a result of improper usage, negligence, or failure to adhere to this disclaimer.
Enjoy the thrill of our motors responsibly and with safety as your utmost priority.
*Price is for self-installation, an additional cost will be charged if the motor has to be installed by us.
XUB-80 Motor (Ultra Bee) PEAK POWER 40000W VOLTAGE RANGE 48v – 104v MAX TORQUE 65Nm MAX STABLE ROTOR RPM 12000RPM MAX EFFICIENCY 94% MOTOR CONFIGURATION 10 poles and 12 slots WINDING TYPE Dual Y parallel connection STATOR AND ROTOR STACK THICKNESS 80MM SENSING METHOD NJDC 605 Encoder KV Value 85~90KV Rated power Air cooled: 9,000W(Continuous run) Water cooled: 11,000W(Continuous run) Max Phase current 900A Rated Phase current (Continuous run) 500A (35Nm) Motor temperature 180 deg C windings 140 deg C start limiting 160 deg C power cut Waterproofing IP67 Anti-corrosion Yes Colors Black with Black End Cap Black with Red End Cap Black with Blue End Cap Black with Gold End Cap Black with Purple End Cap Weight/Size Air cooled: OD181.5mm*L138mm 13KG Water cooled: (TBD) Warranty 2 Year SKU: XUB-80-MTR-GD -
EBMX Motors
EBMX XUB-80 SurRon Ultra Bee Motor – Blue
EBMX XUB-80 SurRon Ultra Bee Motor
EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Motor.
The XUB-80 Motor has been purpose built with dirt bike riders in mind.
Slightly bigger with an 80mm Stator thickness and more powerful than its little brother the XLB-60.
40KW rated & designed from the ground up to handle the heat, 180C rated windings with U42H magnets.
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 12000RPM.
Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built these motors to stay cool under race conditions to ensure you focus on your riding and not your motor temperatures. It doesn’t matter if you are on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 13000RPM. Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built this motor to perform back to back, if your on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.
Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result, they offer a more responsive motor experience and enhance performance reliability and durability. Furthermore, they contribute to improved low-end torque control and overall motor response.
Note
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning. If people want to buy an EBMX motor and combine it with another controller, they have to try to make it work properly themselves.
Our new motors have been engineered for performance enthusiasts and experienced riders in controlled environments. These motors are significantly faster than standard motors, and their extreme speed can pose serious risks if not handled with caution.
IMPORTANT SAFETY CONSIDERATIONS:
- NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. These motors are strictly meant for off-road use and controlled environments only.
- EXPERIENCED RIDERS ONLY: These high-performance motors are recommended for experienced riders who possess the necessary skills and expertise to handle powerful machines. Novice riders are strongly advised against using our motors.
- USE WITH CAUTION: The enhanced speed and power of our motors require extreme care and attentiveness. Always exercise caution and be aware of your surroundings when operating our products.
- UPGRADE SAFETY EQUIPMENT: It is crucial to ensure that your bike is equipped with upgraded brakes and other safety features capable of handling the increased speed and power provided by our motors. Using the motor with stock brakes or inadequate safety measures may result in accidents and severe injuries.
- ADHERE TO LOCAL LAWS: Familiarize yourself with local regulations and laws pertaining to off-road vehicle usage in your area. Always ride within designated areas and private tracks that allow for safe operation.
- KEEP AWAY FROM CHILDREN: Our motors are not toys, and they must be kept out of reach of children. Never allow minors or inexperienced individuals to operate these motors.
- RIDE RESPONSIBLY: Ensure that you are in a sound state of mind and not under the influence of any substances that could impair your judgment before operating the motor.
By purchasing and using EBMX Motors products, you acknowledge and understand the inherent risks associated with high-speed off-road motor use. EBMX or E-BIKES BORNEM shall not be liable for any injuries, accidents, damages, or losses incurred as a result of improper usage, negligence, or failure to adhere to this disclaimer.
Enjoy the thrill of our motors responsibly and with safety as your utmost priority.
*Price is for self-installation, an additional cost will be charged if the motor has to be installed by us.
XUB-80 Motor (Ultra Bee) PEAK POWER 40000W VOLTAGE RANGE 48v – 104v MAX TORQUE 65Nm MAX STABLE ROTOR RPM 12000RPM MAX EFFICIENCY 94% MOTOR CONFIGURATION 10 poles and 12 slots WINDING TYPE Dual Y parallel connection STATOR AND ROTOR STACK THICKNESS 80MM SENSING METHOD NJDC 605 Encoder KV Value 85~90KV Rated power Air cooled: 9,000W(Continuous run) Water cooled: 11,000W(Continuous run) Max Phase current 900A Rated Phase current (Continuous run) 500A (35Nm) Motor temperature 180 deg C windings 140 deg C start limiting 160 deg C power cut Waterproofing IP67 Anti-corrosion Yes Colors Black with Black End Cap Black with Red End Cap Black with Blue End Cap Black with Gold End Cap Black with Purple End Cap Weight/Size Air cooled: OD181.5mm*L138mm 13KG Water cooled: (TBD) Warranty 2 Year SKU: XUB-80-MTR-BL -
EBMX Motors
EBMX XUB-80 SurRon Ultra Bee Motor – Red
EBMX XUB-80 SurRon Ultra Bee Motor
EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Motor.
The XUB-80 Motor has been purpose built with dirt bike riders in mind.
Slightly bigger with an 80mm Stator thickness and more powerful than its little brother the XLB-60.
40KW rated & designed from the ground up to handle the heat, 180C rated windings with U42H magnets.
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 12000RPM.
Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built these motors to stay cool under race conditions to ensure you focus on your riding and not your motor temperatures. It doesn’t matter if you are on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 13000RPM. Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built this motor to perform back to back, if your on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.
Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result, they offer a more responsive motor experience and enhance performance reliability and durability. Furthermore, they contribute to improved low-end torque control and overall motor response.
Note
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning. If people want to buy an EBMX motor and combine it with another controller, they have to try to make it work properly themselves.
Our new motors have been engineered for performance enthusiasts and experienced riders in controlled environments. These motors are significantly faster than standard motors, and their extreme speed can pose serious risks if not handled with caution.
IMPORTANT SAFETY CONSIDERATIONS:
- NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. These motors are strictly meant for off-road use and controlled environments only.
- EXPERIENCED RIDERS ONLY: These high-performance motors are recommended for experienced riders who possess the necessary skills and expertise to handle powerful machines. Novice riders are strongly advised against using our motors.
- USE WITH CAUTION: The enhanced speed and power of our motors require extreme care and attentiveness. Always exercise caution and be aware of your surroundings when operating our products.
- UPGRADE SAFETY EQUIPMENT: It is crucial to ensure that your bike is equipped with upgraded brakes and other safety features capable of handling the increased speed and power provided by our motors. Using the motor with stock brakes or inadequate safety measures may result in accidents and severe injuries.
- ADHERE TO LOCAL LAWS: Familiarize yourself with local regulations and laws pertaining to off-road vehicle usage in your area. Always ride within designated areas and private tracks that allow for safe operation.
- KEEP AWAY FROM CHILDREN: Our motors are not toys, and they must be kept out of reach of children. Never allow minors or inexperienced individuals to operate these motors.
- RIDE RESPONSIBLY: Ensure that you are in a sound state of mind and not under the influence of any substances that could impair your judgment before operating the motor.
By purchasing and using EBMX Motors products, you acknowledge and understand the inherent risks associated with high-speed off-road motor use. EBMX or E-BIKES BORNEM shall not be liable for any injuries, accidents, damages, or losses incurred as a result of improper usage, negligence, or failure to adhere to this disclaimer.
Enjoy the thrill of our motors responsibly and with safety as your utmost priority.
*Price is for self-installation, an additional cost will be charged if the motor has to be installed by us.
XUB-80 Motor (Ultra Bee) PEAK POWER 40000W VOLTAGE RANGE 48v – 104v MAX TORQUE 65Nm MAX STABLE ROTOR RPM 12000RPM MAX EFFICIENCY 94% MOTOR CONFIGURATION 10 poles and 12 slots WINDING TYPE Dual Y parallel connection STATOR AND ROTOR STACK THICKNESS 80MM SENSING METHOD NJDC 605 Encoder KV Value 85~90KV Rated power Air cooled: 9,000W(Continuous run) Water cooled: 11,000W(Continuous run) Max Phase current 900A Rated Phase current (Continuous run) 500A (35Nm) Motor temperature 180 deg C windings 140 deg C start limiting 160 deg C power cut Waterproofing IP67 Anti-corrosion Yes Colors Black with Black End Cap Black with Red End Cap Black with Blue End Cap Black with Gold End Cap Black with Purple End Cap Weight/Size Air cooled: OD181.5mm*L138mm 13KG Water cooled: (TBD) Warranty 2 Year SKU: XUB-80-MTR-RD -
EBMX Motors
EBMX XUB-80 SurRon Ultra Bee Motor – Purple
EBMX XUB-80 SurRon Ultra Bee Motor
EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Motor.
The XUB-80 Motor has been purpose built with dirt bike riders in mind.
Slightly bigger with an 80mm Stator thickness and more powerful than its little brother the XLB-60.
40KW rated & designed from the ground up to handle the heat, 180C rated windings with U42H magnets.
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 12000RPM.
Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built these motors to stay cool under race conditions to ensure you focus on your riding and not your motor temperatures. It doesn’t matter if you are on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 13000RPM. Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built this motor to perform back to back, if your on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.
Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result, they offer a more responsive motor experience and enhance performance reliability and durability. Furthermore, they contribute to improved low-end torque control and overall motor response.
Note
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning. If people want to buy an EBMX motor and combine it with another controller, they have to try to make it work properly themselves.
Our new motors have been engineered for performance enthusiasts and experienced riders in controlled environments. These motors are significantly faster than standard motors, and their extreme speed can pose serious risks if not handled with caution.
IMPORTANT SAFETY CONSIDERATIONS:
- NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. These motors are strictly meant for off-road use and controlled environments only.
- EXPERIENCED RIDERS ONLY: These high-performance motors are recommended for experienced riders who possess the necessary skills and expertise to handle powerful machines. Novice riders are strongly advised against using our motors.
- USE WITH CAUTION: The enhanced speed and power of our motors require extreme care and attentiveness. Always exercise caution and be aware of your surroundings when operating our products.
- UPGRADE SAFETY EQUIPMENT: It is crucial to ensure that your bike is equipped with upgraded brakes and other safety features capable of handling the increased speed and power provided by our motors. Using the motor with stock brakes or inadequate safety measures may result in accidents and severe injuries.
- ADHERE TO LOCAL LAWS: Familiarize yourself with local regulations and laws pertaining to off-road vehicle usage in your area. Always ride within designated areas and private tracks that allow for safe operation.
- KEEP AWAY FROM CHILDREN: Our motors are not toys, and they must be kept out of reach of children. Never allow minors or inexperienced individuals to operate these motors.
- RIDE RESPONSIBLY: Ensure that you are in a sound state of mind and not under the influence of any substances that could impair your judgment before operating the motor.
By purchasing and using EBMX Motors products, you acknowledge and understand the inherent risks associated with high-speed off-road motor use. EBMX or E-BIKES BORNEM shall not be liable for any injuries, accidents, damages, or losses incurred as a result of improper usage, negligence, or failure to adhere to this disclaimer.
Enjoy the thrill of our motors responsibly and with safety as your utmost priority.
*Price is for self-installation, an additional cost will be charged if the motor has to be installed by us.
XUB-80 Motor (Ultra Bee) PEAK POWER 40000W VOLTAGE RANGE 48v – 104v MAX TORQUE 65Nm MAX STABLE ROTOR RPM 12000RPM MAX EFFICIENCY 94% MOTOR CONFIGURATION 10 poles and 12 slots WINDING TYPE Dual Y parallel connection STATOR AND ROTOR STACK THICKNESS 80MM SENSING METHOD NJDC 605 Encoder KV Value 85~90KV Rated power Air cooled: 9,000W(Continuous run) Water cooled: 11,000W(Continuous run) Max Phase current 900A Rated Phase current (Continuous run) 500A (35Nm) Motor temperature 180 deg C windings 140 deg C start limiting 160 deg C power cut Waterproofing IP67 Anti-corrosion Yes Colors Black with Black End Cap Black with Red End Cap Black with Blue End Cap Black with Gold End Cap Black with Purple End Cap Weight/Size Air cooled: OD181.5mm*L138mm 13KG Water cooled: (TBD) Warranty 2 Year SKU: XUB-80-MTR-PL -
EBMX Motors
EBMX XUB-80 SurRon Ultra Bee Motor – Black
EBMX XUB-80 SurRon Ultra Bee Motor
EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Motor.
The XUB-80 Motor has been purpose built with dirt bike riders in mind.
Slightly bigger with an 80mm Stator thickness and more powerful than its little brother the XLB-60.
40KW rated & designed from the ground up to handle the heat, 180C rated windings with U42H magnets.
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 12000RPM.
Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built these motors to stay cool under race conditions to ensure you focus on your riding and not your motor temperatures. It doesn’t matter if you are on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 13000RPM. Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built this motor to perform back to back, if your on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.
Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result, they offer a more responsive motor experience and enhance performance reliability and durability. Furthermore, they contribute to improved low-end torque control and overall motor response.
Note
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning. If people want to buy an EBMX motor and combine it with another controller, they have to try to make it work properly themselves.
Our new motors have been engineered for performance enthusiasts and experienced riders in controlled environments. These motors are significantly faster than standard motors, and their extreme speed can pose serious risks if not handled with caution.
IMPORTANT SAFETY CONSIDERATIONS:
- NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. These motors are strictly meant for off-road use and controlled environments only.
- EXPERIENCED RIDERS ONLY: These high-performance motors are recommended for experienced riders who possess the necessary skills and expertise to handle powerful machines. Novice riders are strongly advised against using our motors.
- USE WITH CAUTION: The enhanced speed and power of our motors require extreme care and attentiveness. Always exercise caution and be aware of your surroundings when operating our products.
- UPGRADE SAFETY EQUIPMENT: It is crucial to ensure that your bike is equipped with upgraded brakes and other safety features capable of handling the increased speed and power provided by our motors. Using the motor with stock brakes or inadequate safety measures may result in accidents and severe injuries.
- ADHERE TO LOCAL LAWS: Familiarize yourself with local regulations and laws pertaining to off-road vehicle usage in your area. Always ride within designated areas and private tracks that allow for safe operation.
- KEEP AWAY FROM CHILDREN: Our motors are not toys, and they must be kept out of reach of children. Never allow minors or inexperienced individuals to operate these motors.
- RIDE RESPONSIBLY: Ensure that you are in a sound state of mind and not under the influence of any substances that could impair your judgment before operating the motor.
By purchasing and using EBMX Motors products, you acknowledge and understand the inherent risks associated with high-speed off-road motor use. EBMX or E-BIKES BORNEM shall not be liable for any injuries, accidents, damages, or losses incurred as a result of improper usage, negligence, or failure to adhere to this disclaimer.
Enjoy the thrill of our motors responsibly and with safety as your utmost priority.
*Price is for self-installation, an additional cost will be charged if the motor has to be installed by us.
XUB-80 Motor (Ultra Bee) PEAK POWER 40000W VOLTAGE RANGE 48v – 104v MAX TORQUE 65Nm MAX STABLE ROTOR RPM 12000RPM MAX EFFICIENCY 94% MOTOR CONFIGURATION 10 poles and 12 slots WINDING TYPE Dual Y parallel connection STATOR AND ROTOR STACK THICKNESS 80MM SENSING METHOD NJDC 605 Encoder KV Value 85~90KV Rated power Air cooled: 9,000W(Continuous run) Water cooled: 11,000W(Continuous run) Max Phase current 900A Rated Phase current (Continuous run) 500A (35Nm) Motor temperature 180 deg C windings 140 deg C start limiting 160 deg C power cut Waterproofing IP67 Anti-corrosion Yes Colors Black with Black End Cap Black with Red End Cap Black with Blue End Cap Black with Gold End Cap Black with Purple End Cap Weight/Size Air cooled: OD181.5mm*L138mm 13KG Water cooled: (TBD) Warranty 2 Year SKU: XUB-80-MTR-B -
EBMX Motors
EBMX XLB-60 SurRon Light Bee Motor – Blue
EBMX XLB-60 SurRon Light Bee Motor
EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Motor.
The XLB-60 Motor has been purpose built with dirt bike riders in mind.
35KW rated and tested, designed from the ground up to handle the heat, 180C rated windings with U42H magnets
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 13000RPM. Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built this motor to perform back to back, if your on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.
Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result, they offer a more responsive motor experience and enhance performance reliability and durability. Furthermore, they contribute to improved low-end torque control and overall motor response.
A EBMX Motor Bash Guard is included with each purchase of your EBMX XLB-60 Motor. This cleverly designed simple guard will protect both the OEM Surron Light bee Motor and the EBMX upgraded XLB-60 Motor. Bolts on far easier than the SXS type and offers a custom befit protection for the XLB-60 not found on other guards.
Note
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning. If people want to buy an EBMX motor and combine it with another controller, they have to try to make it work properly themselves.
Our new motors have been engineered for performance enthusiasts and experienced riders in controlled environments. These motors are significantly faster than standard motors, and their extreme speed can pose serious risks if not handled with caution.
IMPORTANT SAFETY CONSIDERATIONS:
- NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. These motors are strictly meant for off-road use and controlled environments only.
- EXPERIENCED RIDERS ONLY: These high-performance motors are recommended for experienced riders who possess the necessary skills and expertise to handle powerful machines. Novice riders are strongly advised against using our motors.
- USE WITH CAUTION: The enhanced speed and power of our motors require extreme care and attentiveness. Always exercise caution and be aware of your surroundings when operating our products.
- UPGRADE SAFETY EQUIPMENT: It is crucial to ensure that your bike is equipped with upgraded brakes and other safety features capable of handling the increased speed and power provided by our motors. Using the motor with stock brakes or inadequate safety measures may result in accidents and severe injuries.
- ADHERE TO LOCAL LAWS: Familiarize yourself with local regulations and laws pertaining to off-road vehicle usage in your area. Always ride within designated areas and private tracks that allow for safe operation.
- KEEP AWAY FROM CHILDREN: Our motors are not toys, and they must be kept out of reach of children. Never allow minors or inexperienced individuals to operate these motors.
- RIDE RESPONSIBLY: Ensure that you are in a sound state of mind and not under the influence of any substances that could impair your judgment before operating the motor.
By purchasing and using EBMX Motors products, you acknowledge and understand the inherent risks associated with high-speed off-road motor use. EBMX or E-BIKES BORNEM shall not be liable for any injuries, accidents, damages, or losses incurred as a result of improper usage, negligence, or failure to adhere to this disclaimer.
Enjoy the thrill of our motors responsibly and with safety as your utmost priority.
*Price is for self-installation, an additional cost will be charged if the motor has to be installed by us.
XLB-60 Motor (Light Bee) Specifications PEAK POWER 35000W VOLTAGE RANCE 48v – 104v MAX TORQUE 52Nm MAX STABLE ROTOR RPM 13000RPM MAX EFFICIENCY 93% MOTOR CONFIGURATION 10 poles and 12 slots WINDING TYPE Dual Y parallel connection STATOR AND ROTOR STACK THICKNESS 60MM SENSING METHOD NJDC 605 Encoder KV Value 95KV Rated power Air cooled: 13,600W(Continuous run for 28 mins) 24,000W(Continuous run for 2 min 20seconds) Water cooled: 26,000W(4:30S) Warranty 2 Year Max Phase current 900A Rated Phase current (Continuous run) 500A (28Nm) Motor temperature 180 deg C windings 140 deg C start limiting 160 deg C power cut Waterproofing IP67 Anti-corrosion Yes Colors Black with Black End Cap Black with Red End Cap Black with Blue End Cap Black with Gold End Cap Black with Purple End Cap Weight/Size Air cooled: OD181.5mm*L118mm 10.5KG Water cooled: OD187mm*L118mm 12.5KG SKU: XLB-60-MTR-BL -
EBMX Motors
EBMX XLB-60 SurRon Light Bee Motor – Red
EBMX XLB-60 SurRon Light Bee Motor
EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Motor.
The XLB-60 Motor has been purpose built with dirt bike riders in mind.
35KW rated and tested, designed from the ground up to handle the heat, 180C rated windings with U42H magnets
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 13000RPM. Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built this motor to perform back to back, if your on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.
Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result, they offer a more responsive motor experience and enhance performance reliability and durability. Furthermore, they contribute to improved low-end torque control and overall motor response.
A EBMX Motor Bash Guard is included with each purchase of your EBMX XLB-60 Motor. This cleverly designed simple guard will protect both the OEM Surron Light bee Motor and the EBMX upgraded XLB-60 Motor. Bolts on far easier than the SXS type and offers a custom befit protection for the XLB-60 not found on other guards.
Note
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning. If people want to buy an EBMX motor and combine it with another controller, they have to try to make it work properly themselves.
Our new motors have been engineered for performance enthusiasts and experienced riders in controlled environments. These motors are significantly faster than standard motors, and their extreme speed can pose serious risks if not handled with caution.
IMPORTANT SAFETY CONSIDERATIONS:
- NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. These motors are strictly meant for off-road use and controlled environments only.
- EXPERIENCED RIDERS ONLY: These high-performance motors are recommended for experienced riders who possess the necessary skills and expertise to handle powerful machines. Novice riders are strongly advised against using our motors.
- USE WITH CAUTION: The enhanced speed and power of our motors require extreme care and attentiveness. Always exercise caution and be aware of your surroundings when operating our products.
- UPGRADE SAFETY EQUIPMENT: It is crucial to ensure that your bike is equipped with upgraded brakes and other safety features capable of handling the increased speed and power provided by our motors. Using the motor with stock brakes or inadequate safety measures may result in accidents and severe injuries.
- ADHERE TO LOCAL LAWS: Familiarize yourself with local regulations and laws pertaining to off-road vehicle usage in your area. Always ride within designated areas and private tracks that allow for safe operation.
- KEEP AWAY FROM CHILDREN: Our motors are not toys, and they must be kept out of reach of children. Never allow minors or inexperienced individuals to operate these motors.
- RIDE RESPONSIBLY: Ensure that you are in a sound state of mind and not under the influence of any substances that could impair your judgment before operating the motor.
By purchasing and using EBMX Motors products, you acknowledge and understand the inherent risks associated with high-speed off-road motor use. EBMX or E-BIKES BORNEM shall not be liable for any injuries, accidents, damages, or losses incurred as a result of improper usage, negligence, or failure to adhere to this disclaimer.
Enjoy the thrill of our motors responsibly and with safety as your utmost priority.
*Price is for self-installation, an additional cost will be charged if the motor has to be installed by us.
XLB-60 Motor (Light Bee) Specifications PEAK POWER 35000W VOLTAGE RANCE 48v – 104v MAX TORQUE 52Nm MAX STABLE ROTOR RPM 13000RPM MAX EFFICIENCY 93% MOTOR CONFIGURATION 10 poles and 12 slots WINDING TYPE Dual Y parallel connection STATOR AND ROTOR STACK THICKNESS 60MM SENSING METHOD NJDC 605 Encoder KV Value 95KV Rated power Air cooled: 13,600W(Continuous run for 28 mins) 24,000W(Continuous run for 2 min 20seconds) Water cooled: 26,000W(4:30S) Warranty 2 Year Max Phase current 900A Rated Phase current (Continuous run) 500A (28Nm) Motor temperature 180 deg C windings 140 deg C start limiting 160 deg C power cut Waterproofing IP67 Anti-corrosion Yes Colors Black with Black End Cap Black with Red End Cap Black with Blue End Cap Black with Gold End Cap Black with Purple End Cap Weight/Size Air cooled: OD181.5mm*L118mm 10.5KG Water cooled: OD187mm*L118mm 12.5KG SKU: XLB-60-MTR-RD -
EBMX Motors
EBMX XLB-60 SurRon Light Bee Motor – Gold
EBMX XLB-60 SurRon Light Bee Motor
EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Motor.
The XLB-60 Motor has been purpose built with dirt bike riders in mind.
35KW rated and tested, designed from the ground up to handle the heat, 180C rated windings with U42H magnets
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 13000RPM. Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built this motor to perform back to back, if your on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.
Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result, they offer a more responsive motor experience and enhance performance reliability and durability. Furthermore, they contribute to improved low-end torque control and overall motor response.
A EBMX Motor Bash Guard is included with each purchase of your EBMX XLB-60 Motor. This cleverly designed simple guard will protect both the OEM Surron Light bee Motor and the EBMX upgraded XLB-60 Motor. Bolts on far easier than the SXS type and offers a custom befit protection for the XLB-60 not found on other guards.
Note
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning. If people want to buy an EBMX motor and combine it with another controller, they have to try to make it work properly themselves.
Our new motors have been engineered for performance enthusiasts and experienced riders in controlled environments. These motors are significantly faster than standard motors, and their extreme speed can pose serious risks if not handled with caution.
IMPORTANT SAFETY CONSIDERATIONS:
- NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. These motors are strictly meant for off-road use and controlled environments only.
- EXPERIENCED RIDERS ONLY: These high-performance motors are recommended for experienced riders who possess the necessary skills and expertise to handle powerful machines. Novice riders are strongly advised against using our motors.
- USE WITH CAUTION: The enhanced speed and power of our motors require extreme care and attentiveness. Always exercise caution and be aware of your surroundings when operating our products.
- UPGRADE SAFETY EQUIPMENT: It is crucial to ensure that your bike is equipped with upgraded brakes and other safety features capable of handling the increased speed and power provided by our motors. Using the motor with stock brakes or inadequate safety measures may result in accidents and severe injuries.
- ADHERE TO LOCAL LAWS: Familiarize yourself with local regulations and laws pertaining to off-road vehicle usage in your area. Always ride within designated areas and private tracks that allow for safe operation.
- KEEP AWAY FROM CHILDREN: Our motors are not toys, and they must be kept out of reach of children. Never allow minors or inexperienced individuals to operate these motors.
- RIDE RESPONSIBLY: Ensure that you are in a sound state of mind and not under the influence of any substances that could impair your judgment before operating the motor.
By purchasing and using EBMX Motors products, you acknowledge and understand the inherent risks associated with high-speed off-road motor use. EBMX or E-BIKES BORNEM shall not be liable for any injuries, accidents, damages, or losses incurred as a result of improper usage, negligence, or failure to adhere to this disclaimer.
Enjoy the thrill of our motors responsibly and with safety as your utmost priority.
*Price is for self-installation, an additional cost will be charged if the motor has to be installed by us.
XLB-60 Motor (Light Bee) Specifications PEAK POWER 35000W VOLTAGE RANCE 48v – 104v MAX TORQUE 52Nm MAX STABLE ROTOR RPM 13000RPM MAX EFFICIENCY 93% MOTOR CONFIGURATION 10 poles and 12 slots WINDING TYPE Dual Y parallel connection STATOR AND ROTOR STACK THICKNESS 60MM SENSING METHOD NJDC 605 Encoder KV Value 95KV Rated power Air cooled: 13,600W(Continuous run for 28 mins) 24,000W(Continuous run for 2 min 20seconds) Water cooled: 26,000W(4:30S) Warranty 2 Year Max Phase current 900A Rated Phase current (Continuous run) 500A (28Nm) Motor temperature 180 deg C windings 140 deg C start limiting 160 deg C power cut Waterproofing IP67 Anti-corrosion Yes Colors Black with Black End Cap Black with Red End Cap Black with Blue End Cap Black with Gold End Cap Black with Purple End Cap Weight/Size Air cooled: OD181.5mm*L118mm 10.5KG Water cooled: OD187mm*L118mm 12.5KG SKU: XLB-60-MTR-GD -
EBMX Motors
EBMX XLB-60 SurRon Light Bee Motor – Purple
EBMX XLB-60 SurRon Light Bee Motor
EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Motor.
The XLB-60 Motor has been purpose built with dirt bike riders in mind.
35KW rated and tested, designed from the ground up to handle the heat, 180C rated windings with U42H magnets
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 13000RPM. Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built this motor to perform back to back, if your on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.
Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result, they offer a more responsive motor experience and enhance performance reliability and durability. Furthermore, they contribute to improved low-end torque control and overall motor response.
A EBMX Motor Bash Guard is included with each purchase of your EBMX XLB-60 Motor. This cleverly designed simple guard will protect both the OEM Surron Light bee Motor and the EBMX upgraded XLB-60 Motor. Bolts on far easier than the SXS type and offers a custom befit protection for the XLB-60 not found on other guards.
Note
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning. If people want to buy an EBMX motor and combine it with another controller, they have to try to make it work properly themselves.
Our new motors have been engineered for performance enthusiasts and experienced riders in controlled environments. These motors are significantly faster than standard motors, and their extreme speed can pose serious risks if not handled with caution.
IMPORTANT SAFETY CONSIDERATIONS:
- NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. These motors are strictly meant for off-road use and controlled environments only.
- EXPERIENCED RIDERS ONLY: These high-performance motors are recommended for experienced riders who possess the necessary skills and expertise to handle powerful machines. Novice riders are strongly advised against using our motors.
- USE WITH CAUTION: The enhanced speed and power of our motors require extreme care and attentiveness. Always exercise caution and be aware of your surroundings when operating our products.
- UPGRADE SAFETY EQUIPMENT: It is crucial to ensure that your bike is equipped with upgraded brakes and other safety features capable of handling the increased speed and power provided by our motors. Using the motor with stock brakes or inadequate safety measures may result in accidents and severe injuries.
- ADHERE TO LOCAL LAWS: Familiarize yourself with local regulations and laws pertaining to off-road vehicle usage in your area. Always ride within designated areas and private tracks that allow for safe operation.
- KEEP AWAY FROM CHILDREN: Our motors are not toys, and they must be kept out of reach of children. Never allow minors or inexperienced individuals to operate these motors.
- RIDE RESPONSIBLY: Ensure that you are in a sound state of mind and not under the influence of any substances that could impair your judgment before operating the motor.
By purchasing and using EBMX Motors products, you acknowledge and understand the inherent risks associated with high-speed off-road motor use. EBMX or E-BIKES BORNEM shall not be liable for any injuries, accidents, damages, or losses incurred as a result of improper usage, negligence, or failure to adhere to this disclaimer.
Enjoy the thrill of our motors responsibly and with safety as your utmost priority.
*Price is for self-installation, an additional cost will be charged if the motor has to be installed by us.
XLB-60 Motor (Light Bee) Specifications PEAK POWER 35000W VOLTAGE RANCE 48v – 104v MAX TORQUE 52Nm MAX STABLE ROTOR RPM 13000RPM MAX EFFICIENCY 93% MOTOR CONFIGURATION 10 poles and 12 slots WINDING TYPE Dual Y parallel connection STATOR AND ROTOR STACK THICKNESS 60MM SENSING METHOD NJDC 605 Encoder KV Value 95KV Rated power Air cooled: 13,600W(Continuous run for 28 mins) 24,000W(Continuous run for 2 min 20seconds) Water cooled: 26,000W(4:30S) Warranty 2 Year Max Phase current 900A Rated Phase current (Continuous run) 500A (28Nm) Motor temperature 180 deg C windings 140 deg C start limiting 160 deg C power cut Waterproofing IP67 Anti-corrosion Yes Colors Black with Black End Cap Black with Red End Cap Black with Blue End Cap Black with Gold End Cap Black with Purple End Cap Weight/Size Air cooled: OD181.5mm*L118mm 10.5KG Water cooled: OD187mm*L118mm 12.5KG SKU: XLB-60-MTR-PL -
EBMX Motors
EBMX XLB-60 SurRon Light Bee Motor – Black
EBMX XLB-60 SurRon Light Bee Motor
EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Motor.
The XLB-60 Motor has been purpose built with dirt bike riders in mind.
35KW rated and tested, designed from the ground up to handle the heat, 180C rated windings with U42H magnets
Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 13000RPM. Encoder based motor control for increased low end torque response and smooth predicable power delivery.
We built this motor to perform back to back, if your on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.
Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result, they offer a more responsive motor experience and enhance performance reliability and durability. Furthermore, they contribute to improved low-end torque control and overall motor response.
A EBMX Motor Bash Guard is included with each purchase of your EBMX XLB-60 Motor. This cleverly designed simple guard will protect both the OEM Surron Light bee Motor and the EBMX upgraded XLB-60 Motor. Bolts on far easier than the SXS type and offers a custom befit protection for the XLB-60 not found on other guards.
Note
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning. If people want to buy an EBMX motor and combine it with another controller, they have to try to make it work properly themselves.
Our new motors have been engineered for performance enthusiasts and experienced riders in controlled environments. These motors are significantly faster than standard motors, and their extreme speed can pose serious risks if not handled with caution.
IMPORTANT SAFETY CONSIDERATIONS:
- NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. These motors are strictly meant for off-road use and controlled environments only.
- EXPERIENCED RIDERS ONLY: These high-performance motors are recommended for experienced riders who possess the necessary skills and expertise to handle powerful machines. Novice riders are strongly advised against using our motors.
- USE WITH CAUTION: The enhanced speed and power of our motors require extreme care and attentiveness. Always exercise caution and be aware of your surroundings when operating our products.
- UPGRADE SAFETY EQUIPMENT: It is crucial to ensure that your bike is equipped with upgraded brakes and other safety features capable of handling the increased speed and power provided by our motors. Using the motor with stock brakes or inadequate safety measures may result in accidents and severe injuries.
- ADHERE TO LOCAL LAWS: Familiarize yourself with local regulations and laws pertaining to off-road vehicle usage in your area. Always ride within designated areas and private tracks that allow for safe operation.
- KEEP AWAY FROM CHILDREN: Our motors are not toys, and they must be kept out of reach of children. Never allow minors or inexperienced individuals to operate these motors.
- RIDE RESPONSIBLY: Ensure that you are in a sound state of mind and not under the influence of any substances that could impair your judgment before operating the motor.
By purchasing and using EBMX Motors products, you acknowledge and understand the inherent risks associated with high-speed off-road motor use. EBMX or E-BIKES BORNEM shall not be liable for any injuries, accidents, damages, or losses incurred as a result of improper usage, negligence, or failure to adhere to this disclaimer.
Enjoy the thrill of our motors responsibly and with safety as your utmost priority.
*Price is for self-installation, an additional cost will be charged if the motor has to be installed by us.
XLB-60 Motor (Light Bee) Specifications PEAK POWER 35000W VOLTAGE RANCE 48v – 104v MAX TORQUE 52Nm MAX STABLE ROTOR RPM 13000RPM MAX EFFICIENCY 93% MOTOR CONFIGURATION 10 poles and 12 slots WINDING TYPE Dual Y parallel connection STATOR AND ROTOR STACK THICKNESS 60MM SENSING METHOD NJDC 605 Encoder KV Value 95KV Rated power Air cooled: 13,600W(Continuous run for 28 mins) 24,000W(Continuous run for 2 min 20seconds) Water cooled: 26,000W(4:30S) Warranty 2 Year Max Phase current 900A Rated Phase current (Continuous run) 500A (28Nm) Motor temperature 180 deg C windings 140 deg C start limiting 160 deg C power cut Waterproofing IP67 Anti-corrosion Yes Colors Black with Black End Cap Black with Red End Cap Black with Blue End Cap Black with Gold End Cap Black with Purple End Cap Weight/Size Air cooled: OD181.5mm*L118mm 10.5KG Water cooled: OD187mm*L118mm 12.5KG SKU: XLB-60-MTR-B
